NEW Applications
Download
 

Product Range

CAN4000-8S 4-Channel Isolated CANbus Channels plus Serial Port Controller


General EnquiriesTechnical Support
 
Sahre This Get our newsletter
 
The CAN4000-8S provides four independent CANbus 2.0B controller channels (with galvanic isolation) and eight non-isolated RS-422 / 485 serial ports on a standard PC/104-Plus card.

The CAN4000-8S uses four industry standard Philips SJA1000 CANbus Controllers with advanced features for use in telematics and industrial control applications. The CAN4000-8S supports both BasicCAN mode (power up default) and the enhanced functionality of the PeliCAN mode which handles all CANbus frame types according to CAN Specification 2.0B.

The 8 channel serial port controller provides RS-422 / RS-485 communications up to 10Mbps. Each channel includes jumper selectable termination resistors on each receiver.

 

Highlights

  • 4 independent CANbus controllers
  • BasicCAN and Pelican support
  • Full galvanic isolation
  • CANbus bit rates up to 1Mbits/sec
  • Supports 11-bit and 29-bit identifiers
  • 8 independent serial ports
  • RS-422 / RS-485 operation
  • Up to 10Mbps operation
  • Standard PC/104-Plus form factor
  • Extended Temperature version available
  • Single +5V power supply

CAN Channels

  • Quad SJA1000 CAN 2.0B Controller
  • Basic CAN Mode support
  • Extended CAN Mode (PELICAN Mode) support
  • Four independent full-duplex channels
  • Full galvanic isolation for each channel (input to output and channel to channel)
  • Isolated CANbus channels powered from external +5v supply

CAN Modes

  • Basic Mode
  • Extended Receive Buffer (64-byte receive FIFO)
  • Up to 1MBit/sec data rates
  • Support for 11-bit and 29-bit identifiers
  • PELICAN Mode Extensions
  • Error counters with read/write access
  • Error warning limit
  • Error Interrupts
  • Listen-only capability
  • Hot-plugging support

Serial Ports

  • Eight RS/422 / RS485 ports at up to 10Mbps
  • Jumper selectable termination resistors

PC/104-Plus

  • 133MB/sec bus bandwidth
  • PC/104-Plus bus master/initiator
  • Universal add-on board compliant with 3.3V PC/104-Plus bus signalling (with 5v tolerance)
  • Jumper selectable PC/104-Plus stack level

Physical

  • Single +5V at less than 350mA
  • Operating Temp 0°C to 60°C
  • Operating Temp -40°C to +85°C (extended temp option)
  • Standard 3.6 x 3.8in PC/104+ form factor
 

Downloads

The following order codes can be used when ordering the CAN4000-8S

CAN4000-8S - 4-Channel CANBus / 8 channel serial (0 to 60°C)
CAN4000-8S-Ext - 4-Channel CANBus / 8 channel serial (-40 to 85°C)
Cable-CAN4000 - Cable set for CAN4000

Please complete the form below for further information (* - Required).

 











  captcha image
 
Webrex Web Design