Tiny-PPC837 High Performance PowerPC based PCI/104-Express Communications Controller
The Tiny-PPC837 is a highly integrated PowerPC based controller board optimized for extreme, high performance application in communication systems. The Tiny-PPC837 is powered by the 667MHz MPC8377E PowerQUICC II Pro embedded processor, offering two Gigabit Ethernet ports with dual PCI-Express controllers. The board is an industry standard PCI/104-Express form factor card and offers both PCI Express and traditional 32bit PCI interfaces. The Tiny-PPC837 is currently supported by embedded Linux only (please contact our sales team for information about other embedded operating systems).In addition to the Gigabit Ethernet ports and PCI-Express links, the board also supports up to 2Gbytes of DDR DRAM and an onboard 2Gbyte solid state Flash drive for application and data storage. Off board data storage can be achieved using either the USB 2.0 port or the high speed SATA drive interface.
The Tiny-PPC837 has been designed for demanding digital video storage and video streaming applications.
Highlights
- Fan-less, conduction cooled operation
- 667MHz Freescale MPC8377E PowerQUICC II processor
- Based on e300 PowerPC core
- Up to 2Gbytes high speed 400MHz DDR memory (soldered)
- Dual integrated Gigabit Ethernet ports
- On board 2Gbyte solid state storage (soldered)
- Integrated security encryption accelerator
- Standard SATA I/II compatible interface
- Standard SD card interface / connector
- PCI/104-Express module offering four x1 PCIe links (500Mbytes./sec per link)
- 32 bit PCI expansion via standard PCI-104 expansion connector and mini PCI port
- Two serial ports (RS-232 and RS-422/485)
- USB 2.0 host/device port
- Available in extended temperature option
- Standard PCI/104-Express form factor with I/O extensions (3.7in x 4.0 in)
Block Diagram
Processor
- MPC8377E PowerQUICC™ II Pro Processor
- e300c4s core (32KB I-cache and 32KB D-cache)
- One floating point unit & wwo integer units
- 133 MHz 32-bit local bus
- Integrated power management controller
- Optional encryption acceleration engine
Main Memory
- Soldered 512MBytes DDR2 SDRAM (Up to 1GB)
- Support for up to 400-MHz data rate
- Support for up to 32 simultaneous open pages
- On-the-fly power management using CKE
On-board Storage
- Soldered PATA NANDrive 2GB (Up to 4GB)
- On SATA interface through SATA-PATA converter
Network
- Two Gigabit Ethernet ports
- 10/100/1000 Auto-negotiation
- RGMII PHY 88E1111-B2
- Support for Wake-on-Magic Packet™
Peripherals
- Standard SATA I/II compatible interface
- 1 x RS-232
- 1 x RS-422/485 serial ports
- Mini-AB USB 2.0 Port
- Enhanced Secured Digital Host Controller
PCI/104-Express Bus
- Stackable 156-pin PCIe bus connector
- Four PCI Express x1 Lanes
- SMBus
PCI-104 Bus
- 133MB/sec bus bandwidth
- PCI-104 bus master/initiator
- Up to 4 Bus master add-on cards capable
- 3.3V or 5V PCI bus signalling
mini PCI Bus
- 133MB/sec bus bandwidth
- PCI-104 bus master/initiator
Power
- +5V Power Supply
Physical
- PCI/104-Express stackable card form factor
- Standard 3.775" x 4.05"
- Passive cooling
Environmental
- Operating temperature at 0ºC to 60ºC (-40ºC to +85ºC -EXT option)
- Relative humidity 5% to 95% non-condensing (optional conformal coating)
Miscellaneous
- Single +5V supply
Software Support
- Linux
- VxWorks and others on request








