H264ULL-Encoder

Click image to enlarge H264ULL-Encoder
Ultra Low Latency Quad H.264 Encoder for PCI-104

The H264ULL-ENCODER is an ultra low latency, quad channel, H.264 encoder on a single PCI-104 form factor board. The H264ULL-ENCODER provides a powerful and flexible solution for capturing and compressing up to 4 analog video inputs at full size and at full frame rate to the H.264/MPEG-4 AVC (Part 10) standard.

The ultra low latency full frame rate encoding of four NTSC/ PAL analog video sources offered by the H264ULL-ENCODER can be combined with Advanced Micro Peripherals H264ULL-DECODER to produce an end-to-end ruggedized low latency video streaming solution.

The high performance H.264 video compression and efficient bus utilization allows the H264ULL-ENCODER to be hosted on a low power, fanless CPU, PCI-104 system.

Highlights

  • Real time 4x full size H.264 encode at full frame rate
  • Composite NTSC/PAL/RS-170 video input
  • H.264/MPEG-4 AVC (Part 10) encoder
  • Ultra Low Latency technology with a latency below 40ms
  • Intra-refresh to improve bandwidth utilization
  • Multiple encodes of same input with different settings
  • Motion detection
  • Video Masking
  • Up to four H264ULL-ENCODER boards per system
  • Standard PCI/104 form factor
  • Drivers for WinXP-E and Linux

SDK's

The H264ULL-ENCODER is supported by a set of well- documented and established SDKs that minimize development risk and shorten time to market for applications requiring video recording or streaming.

Supported Platforms Windows 7, Windows 8, Windows 10, Linux
PCI-104 Bus Interface
  • Compliant with PCI Rev 2.1
  • 132 MBytes/sec bandwidth at 33.33 MHz bus speed
  • Single +5 V supply
Analog Video Input
  • 4 composite NTSC/PAL/RS-170 video input channels
  • Anti-aliasing filters on inputs
Video Input Formats
  • Standard CCIR601-NTSC, CCIR-PAL
  • NTSC-M, NTSC-N, NTSC-J, NTSC (4.43), RS-170
  • PAL-B/G/N, PAL-D, PAL-H, PAL-I, PAL-M, PAL-NC, PAL-60
Video Input Adjustments
  • Contrast (or luma gain) adjustable from 0-200% of original
  • Saturation (or chroma gain) adjustable from 0-200% of original
  • Hue (or chroma phase) adjustable from -180° to +180°
  • Birightness (or luma level) can be adjusted from –25 to +25 IRE
  • Software adjustable Sharpness,Gamma and noise suppression
Ultra Low Latency
  • Less than 40ms encode latency
Video Encoding
  • H.264 ISO/IEC 14496-10 baseline and Main Profile up to L4.2
  • Interlaced and progressive video encode support
  • Real-time multi stream H.264 Ultra Low Latency capture
  • 4 channel NTSC D1 (720×480) at 30fps
  • 4 channel PAL D1 (720×576) at 25fps
Bit rate control
  • Constant bit rate (CBR)
  • Variable bit rate (VBR)
Motion detection
  • Motion detection at macroblock granularity
  • Motion vector information
Pre- and post-processing
  • Trans-rating and trans-sizing
  • Selective blocking of video input regions
  • Stream duplication
Configuration support per stream
  • Frame rate
  • Resolution
  • Bit rate control
  • Key frame interval
  • Intra-refresh mode
System Requirements
  • x86 PC-Compatible PCI/104 Computer
  • Spare REQ/GNT on PCI/104 Bus
  • 3.3V signalling PCI/104 bus
Mechanical
  • Standard 3.6 x 3.8in PCI/104 form factor
Operational characteristics
  • Operating temperature 0°C to 60°C
  • Extended temperature -40°C to +85°C (option)
Software
  • Drivers for Win-XP, Linux
  • Comprehensive video recording SDK
  • Sample video recording application in C/C++ source code
H264ULL-Encoder Block Diagram

Order Enquiry for H264ULL-Encoder

Product Codes
  • H264ULL-Encoder - Video Encoder Card (0 to 60°C)
  • H264ULL-Encoder-EXT - Video Encoder Card (-40°C to +85°C)
  • Your Details

  • Delivery Address

  • Requirements

Contact