NEW Applications

Product Range

StreamCorder-HD-HDMI - Standalone HDMI H.264 Video Recorder and Streamer

General EnquiriesTechnical Support
Sahre This Get our newsletter
The StreamCorder-HD-HDMI is an intelligent, stand-alone, H.264 Streaming solution that accepts HDMI input at up to 1080p60 and encodes and streams over 100/1000MBit Ethernet. The single board solution is ideal for demanding applications in Military, Communications, Transportation, mining and Energy industries.

The flexible streaming engine can stream the compressed video direct from the on-board Ethernet port as well as save directly to local storage for later retrieval. Stereo audio embedded in the input HDMI source can also be captured and streamed, synchronized with the video.

The StreamCorder-HD-HDMI also features optional on-board Controller Area Network (CAN), 3-Axis Accelerometer, High sensitivity GPS receiver, Altimeter, and 3-Axis Digital Magnetometer (e-compass). These can integrate with other vehicle systems and data from these sources can be used as meta data embedded within the video and streamed to clients or saved for later analysis.

The StreamCorder-HD-HDMI is an intelligent stand-alone device with it’s own on-board CPU and does not require a host CPU or any driver or OS software. For mechanical convenience the module can be mounted on a PCIe104 stack without consuming host CPU resources.

Subject to change without notification



  • HDMI input up to 1080p60
  • Real-time HD H.264 encode at 1080p60
  • Stereo audio capture from HDMI
  • Single board capture, encode, stream solution
  • RS-485 port for simple control of recording
  • USB 2.0 OTG support for extended local storage
  • Low power operation for long endurance
  • Stand-alone operation
  • Operating system neutral
  • Standard PCIe104 mechanical form factor
  • Optional CAN, GPS, Altimeter, Accelerometer, Compass


  • Unmanned vehicles (UAV, ROV)
  • Rugged video recorders for marine, aviation
  • Situational Awareness
  • Remote Video Surveillance
  • Border Security
  • Traffic Monitoring and Control
  • Video Acquisition and Analytics
  • Solid state multi-channel video and sensor recorders

Block Diagram

HDMI Video Input

  • Flexible Capture at up to 1080p60

Audio Input

  • Embedded Audio captured from HDMI input
  • Provides Audio/Video synchronisation

H.264 Video Encoding

  • ITU-T H.264 (ISO/IEC 14496-10), supported profiles:
    Baseline profile,
    Main profile (I,P frame coding only)
    High profile (I, P frame coding only) at level 4.1
  • Up to 1080p60 encode
  • CAVLC and CABAC coding
  • Supports Variable Bit Rate (VBR)
  • Supports Constant Bit Rate (CBR)

JPEG Encoder

  • JPEG (ISO/IEC 10918-1)
  • Baseline JPEG with JFIF support

Network interface

  • 100/1000MBit Ethernet
  • miniPCIe slot for optional WiFi or 4G Modem

Vetronix Features

  • RS-485 - For simple control of recording
  • USB2.0 OTG - For external storage
  • SD-Card slot - On-board storage
  • CAN2.0B port - For vehicle networks (option)
  • High-sensitivity GPS (option)
  • 3-axis Digital Magnetometer for eCompass (option)
  • 3-axis Accelerometer (option)
  • High sensitivity altimeter (option)


  • Intelligent stand-alone module, does not require host computer
  • Standard 3.6 x 3.8in PCIe104 form factor
  • Mechanical mounting for PCIe104 stack
  • Single +5V supply
  • Operating temp 0°C to 60°C
  • Operating temp -40°C to +85°C (extended temp option)

The following order codes can be used when ordering the StreamCorder-HD-HDMI

STREAMCORDER-HD-HDMI - H.264 HD Video Streamer (0 to 60°C)
STREAMCORDER-HD-HDMI-Ext - H.264 HD Video Streamer (-40°C to +85°C)

Please complete the form below for further information (* - Required).


  captcha image
Webrex Web Design